Cisco Catalyst 3650 Series Switches | Bitmatic

CISCO CATALYST 3650 SERIES SWITCHES

The Cisco® Catalyst® 3650 Series is the next generation of enterprise-class standalone and stackable access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform. The 3650 Series is built on the advanced Cisco StackWise®-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The 3650 Series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE®) on the Cisco Catalyst 3650 Series multigigabit switches, and offer modular and field-replaceable redundant fans and power supplies. The 3650 Series switches also come in a 12-inch lower depth form factor so that you can deploy them in tight wiring closets in remote branches and offices where depth of the switch is a concern. In addition, the 3650 multigigabit switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure. The 3650 Series switches help increase wireless productivity and reduce TCO.

Product Overview

    Integrated wireless controller capability with:

    Up to 40G of wireless capacity per switch (48-port models)

    Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)

   24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports

   24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE[1]

   Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight 10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports

   24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow depth cabinets in enterprise, retail, and branch-office environments

   Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput

   Dual redundant, modular power supplies and three modular fans providing redundancy[2]

   Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy

   Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor

   Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor

   IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6

   IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time synchronization and quality of service (QoS)

   Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9, and enhanced security features

   Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features

   Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support

Switch Models and Configurations

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports and ship with one power supply. Tables 1 through 5 provide further details. Figure 1 is an image of the Cisco Catalyst 3650 Series Switches.

Y:ProductionCisco ProjectsC78 Data SheetC78-729449-12v1a 280616 0342 vinicaC78-729449-12_Cisco Catalyst 3650 Series SwitchesLinksC78-729449-12_Figure01.jpg

Figure 1.     

Cisco Catalyst 3650 Series Switches

Table 1 shows the Cisco Catalyst 3650 Series configurations.

Table 1.        Cisco Catalyst 3650 Series Configurations

Models
Fixed Uplinks
Total 10/100/1000 Ethernet Ports
Default AC Power Supply
Available PoE Power
WS-C3650-24TS
4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP)
24
250 WAC
-
WS-C3650-48TS
48
WS-C3650-24PS
24 PoE+
640 WAC
390 W
WS-C3650-48PS
48 PoE+
WS-C3650-48FS
48 PoE+
1025 WAC
775 W
WS-C3650-24TD
2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP
24
250 WAC
 
WS-C3650-48TD
48
 
 
WS-C3650-24PD
24 PoE+
640 WAC
390 W
WS-C3650-24PDM
24 PoE+
Fixed 640 WAC
390 W
WS-C3650-48PD
48 PoE+
640 WAC
390 W
WS-C3650-48FD
48 PoE+
1025 WAC
775 W
WS-C3650-8X24PD
 
24 PoE+ (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
715 WAC
435 W
WS-C3650-12X48FD
 
48 PoE+ (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-48TQ
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
48
250 WAC
 
WS-C3650-48PQ
48 PoE+
640 WAC
390 W
WS-C3650-48FQ
48 PoE+
1025 WAC
775 W
WS-C3650-48FQM
48 PoE+
Fixed 975 WAC
775 W
WS-C3650-8X24UQ
24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
820 W
WS-C3650-12X48UQ
48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-12X48UR
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-12X48UZ
2 x 40 Gigabit Ethernet with QSFP+
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W


Fixed Uplinks

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase:

   Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP)

   Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP

   Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP

   Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP

   Two 40 Gigabit Ethernet with QSFP+

The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options.

Table 2.        1 and 10 Gigabit Fixed Uplink Configurations

 
Interface Options
Fixed Uplink Ports
10 Gigabit Ethernet SFP+ Ports
Gigabit Ethernet SFP Ports
4 x Gigabit Ethernet fixed uplink ports
0
4
4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports
2
0
0
4
2
2
4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports
4
0
0
4
2
2
3
1
1
3
8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports
8
0
0
8
Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports



OVERVIEW

Product Overview

    Integrated wireless controller capability with:

    Up to 40G of wireless capacity per switch (48-port models)

    Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)

   24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports

   24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE[1]

   Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight 10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports

   24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow depth cabinets in enterprise, retail, and branch-office environments

   Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput

   Dual redundant, modular power supplies and three modular fans providing redundancy[2]

   Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy

   Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor

   Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor

   IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6

   IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time synchronization and quality of service (QoS)

   Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9, and enhanced security features

   Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features

   Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support

SPESIFIKASI

Switch Models and Configurations

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports and ship with one power supply. Tables 1 through 5 provide further details. Figure 1 is an image of the Cisco Catalyst 3650 Series Switches.

Y:ProductionCisco ProjectsC78 Data SheetC78-729449-12v1a 280616 0342 vinicaC78-729449-12_Cisco Catalyst 3650 Series SwitchesLinksC78-729449-12_Figure01.jpg

Figure 1.     

Cisco Catalyst 3650 Series Switches

Table 1 shows the Cisco Catalyst 3650 Series configurations.

Table 1.        Cisco Catalyst 3650 Series Configurations

Models
Fixed Uplinks
Total 10/100/1000 Ethernet Ports
Default AC Power Supply
Available PoE Power
WS-C3650-24TS
4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP)
24
250 WAC
-
WS-C3650-48TS
48
WS-C3650-24PS
24 PoE+
640 WAC
390 W
WS-C3650-48PS
48 PoE+
WS-C3650-48FS
48 PoE+
1025 WAC
775 W
WS-C3650-24TD
2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP
24
250 WAC
 
WS-C3650-48TD
48
 
 
WS-C3650-24PD
24 PoE+
640 WAC
390 W
WS-C3650-24PDM
24 PoE+
Fixed 640 WAC
390 W
WS-C3650-48PD
48 PoE+
640 WAC
390 W
WS-C3650-48FD
48 PoE+
1025 WAC
775 W
WS-C3650-8X24PD
 
24 PoE+ (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
715 WAC
435 W
WS-C3650-12X48FD
 
48 PoE+ (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-48TQ
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
48
250 WAC
 
WS-C3650-48PQ
48 PoE+
640 WAC
390 W
WS-C3650-48FQ
48 PoE+
1025 WAC
775 W
WS-C3650-48FQM
48 PoE+
Fixed 975 WAC
775 W
WS-C3650-8X24UQ
24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
820 W
WS-C3650-12X48UQ
48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-12X48UR
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W
WS-C3650-12X48UZ
2 x 40 Gigabit Ethernet with QSFP+
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)
1100 WAC
660 W


Fixed Uplinks

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase:

   Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP)

   Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP

   Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP

   Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP

   Two 40 Gigabit Ethernet with QSFP+

The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options.

Table 2.        1 and 10 Gigabit Fixed Uplink Configurations

 
Interface Options
Fixed Uplink Ports
10 Gigabit Ethernet SFP+ Ports
Gigabit Ethernet SFP Ports
4 x Gigabit Ethernet fixed uplink ports
0
4
4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports
2
0
0
4
2
2
4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports
4
0
0
4
2
2
3
1
1
3
8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports
8
0
0
8
Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports



GALLERY